question

Stephen Smith avatar image
Stephen Smith asked

Cerbo wont powerup

Powered up a new Cerbo. WiFi light flashed for about ten seconds then nothing. Checked fuse and polarity any other suggestions?

cerbo gx
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Bryan avatar image
Bryan answered ·

This sounds like an issue I had. There's a very specific set of events that can leave the Cerbo in an unstable state after attempting to update from the firmware out of the box, to a new firmware.

Once you get past that version, it can no longer happen - but you might be out of luck, unless you know how to work with SOM style devices and Linux.

I was able to get mine going with the help of Victron Technicians knowledge of their board, but it's not a process for just anyone.

If there is a dealer, your best bet is probably to warranty it, once you've determined that it's not booting and you've got no output.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic