question

vermontskier avatar image
vermontskier asked

Battery Type Switch Position

I have two 6V deep cycle lead acid (GC-2) batteries connected in series to give me my 12V for my camper. I have looked at the Victron MPPT 100/50 manual for the appropriate battery type switch position, but I am confused. What switch position should I use? I believe that it came pre-set at "2".

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

First thing is to check the battery maker's recommendations and match to the values listed in the Victron manual. If this fails use the Victron deep discharge 2.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.