Mopeka PRO H20 connected but do not display on Device list

Question

question

Anders asked May 10, '24

Mopeka PRO H20 connected but do not display on Device list

I am running this on a CCGX with an approved Bluetooth adapter.
OS Version 3.40~8
The sensor is configured via the Mopeka Tank app and is working

The Mopeka sensor does appear on the bluetooth list, but not on the device list.
Any suggestions? I have tried continuous scanning, but not the more "aggressive" send settings on the Mopeka

PS I am running LiFePO4 batteries with 7 cells - hence the low voltage

mopeka sensors

screenshot-2024-05-10-074600.png (80.5 KiB)

screenshot-2024-05-10-073841.png (71.2 KiB)

screenshot-2024-05-10-073906.png (62.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2024-05-10T10:32:56Z

pwfarnell answered · May 10 at 10:32 AM

I am not sure why, all I can suggest is a reboot now you have these devices connected to see if they get picked up better in the system. Orherwise try going back to V3.31 in case it is a beta bug. If it is a beta bug, log it on that thread in the modifications section.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-05-11T06:49:53Z

Anders answered · May 11 at 06:49 AM

1) Reboot - No luck
2) v3.31 - No luck
3) Pair again - Will do next time on premise

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question