question

jem1 avatar image
jem1 asked

Multipal Cerbo GX communicate with each other

Hello,

I was wondering if there is a way to have two Cerbo GX units communicate with each other? Either over some dedicated Victron protocol (Did not find that this should be the case in the manual) or if it is possible for them to exchange data over MODBUS TCP/IP. Dose any one have experience on this topic or seen it be done previously?


Thanks for the replay

cerbo gxVenus OSModbus TCP
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
nickdb avatar image
nickdb answered ·

They are not designed or supported to be part of one system nor to cooperate between separate ones.

They each can be managed via a broker using the various integrations available. Depends what you are trying to achieve.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.