question

mike-r avatar image
mike-r asked

VM-3P75CT Single Phase 2 channel installation

I am really interested in the new Victron energy meter. I have 2 single phase lines coming into my boat so I want to use it as a single phase setup and monitor both lines - one per CT. This should be fairly easy to do but the manual doesn’t show an installation like this. A dealer I contacted says it’s possible but would like to hear that from someone that has done it or one of the Victron experts. Is this possible?

Energy Meter
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Dave Anderer avatar image
Dave Anderer answered ·

I'd like this too.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pv-bauer avatar image
pv-bauer answered ·

Hi mike,
hi dave,
I don't know your setting, if you are using a Multiplus/ Quattro?
Maybe this Question (link) is helpfull for you...

"VM-3P75CT monitoring all MultiPlus IN and OUT ports possible?"
https://community.victronenergy.com/questions/263984/vm-3p75ct-monitoring-all-multiplus-in-and-out-port.html


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Energy Meter Selection Guide