If I get a data download, in this example I had "Yesterday" as the time in VRM and I have 1 minute data logging from the Cerbo, the data logging was at 37 seconds past the minute. However, the Excel file from VRM has an extra blank line put in once every hour on the hour. This is a bit superfluous and causes issues with some graphing / data analysis. An example extract from the file is given below but this is repeated for every hour.
| timestamp | Battery Monitor [277] | Battery Monitor [277] | Battery Monitor [277] | Battery Monitor [277] | Battery Monitor [277] | Battery Monitor [277] |
| Europe/London (+00:00) | Voltage | Starter battery voltage | Current | Consumed Amphours | State of charge | Time to go |
| V | V | A | Ah | % | h | |
| 2023-11-15 00:53:37 | 12.82 | 12.64 | -0.9 | -9.2 | 99.2 | 240 |
| 2023-11-15 00:54:37 | 12.82 | 12.64 | -1 | -9.2 | 99.2 | 240 |
| 2023-11-15 00:55:37 | 12.82 | 12.64 | -1 | -9.2 | 99.2 | 240 |
| 2023-11-15 00:56:37 | 12.82 | 12.64 | -1 | -9.2 | 99.2 | 240 |
| 2023-11-15 00:57:37 | 12.82 | 12.64 | -1 | -9.2 | 99.2 | 240 |
| 2023-11-15 00:58:37 | 12.82 | 12.64 | -1 | -9.3 | 99.2 | 240 |
| 2023-11-15 00:59:37 | 12.82 | 12.64 | -1 | -9.3 | 99.2 | 240 |
| 2023-11-15 01:00:00 | ||||||
| 2023-11-15 01:00:37 | 12.82 | 12.64 | -1 | -9.3 | 99.2 | 240 |
| 2023-11-15 01:01:38 | 12.82 | 12.64 | -1 | -9.3 | 99.1 | 240 |
| 2023-11-15 01:02:37 | 12.82 | 12.64 | -1 | -9.3 | 99.1 | 240 |
| 2023-11-15 01:03:37 | 12.82 | 12.64 | -1 | -9.3 | 99.1 | 240 |
| 2023-11-15 01:04:37 | 12.82 | 12.64 | -1 | -9.4 | 99.1 | 240 |
| 2023-11-15 01:05:37 | 12.82 | 12.64 | -1 | -9.4 | 99.1 | 240 |
| 2023-11-15 01:06:38 | 12.82 | 12.64 | -1 | -9.4 | 99.1 | 240 |
| 2023-11-15 01:07:37 | 12.82 | 12.64 | -1 | -9.4 | 99.1 | 240 |
