question

edvanz avatar image
edvanz asked

Skylla-i not displayed on GX monitor

In my setup, I have Quattro's in parallel with DCM when I turn the DCM down to zero current from shore power so only inverting but switch the Skylla-i on it doesn't show up on the screen as a charger or as connected to shore power. On the screen, it shows the Amps consumed by the Quattro in inverter mode. On the pages tab on the monitor, I can see that the batteries are being charged more than the inverter is taking out. I can understand this behavior from a dum Alternator but expected it not from a Victron product. Did I miss something???

cerbo gxSkylla
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
mvader (Victron Energy) avatar image
mvader (Victron Energy) answered ·

Hi Edvanz, no you didnt do anything wrong. Its simply missing in our software for the overview at the moment.

Its been on the list to repair for a (too long) while - I expect we get to it this year.


my apologies, Matthijs

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

edvanz avatar image
edvanz answered ·

Any news on this @mvader (Victron Energy) Now 2 years ago?? LOL


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jelko avatar image
jelko answered ·

Hi,

I've got the similar issue, my Skylla IP65 is just displayed as "DC-Load". My AC-Input just says "---". Might it be possible to display the charger correctly at some point of time?

BR

Jelko

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources