Smartsolar v1.11

Question

question

dvb asked Feb 16, '23

Bonjour,

Je viens de voir apparaître un nouveau firmware pour mon MPPT 450/200.

Smartsolar v1.10 -> v1.11

Est-ce quelqu'un sait ce que cela corrige, et où trouver le changelog ?

Merci !

smart solar set-up help

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-02-16T16:53:16Z

Thierry Cortassa (Victron Energy Staff) answered · Feb 16, 2023 at 04:53 PM

dans les fimware sur victron profesionel :

Changes applying to all RS products (Inverter RS, Multi RS and MPPT RS):

Report warnings and alarms on the internal display.
Remove upper limit from the battery tail current setting. When pairing multiple chargers together this setting can be larger than the units' own maximum current value.

le reste des modification est pour les inverter rs et les multi rs !

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-02-16T22:09:37Z

dvb answered · Feb 16, 2023 at 10:09 PM

Merci Thierry !

Je me suis inscrit sur le site Victron pour avoir l'ensemble des infos.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.