I've searched but nothing definitive: Aux Controls With SmartSolar products

Question

question

coinstaller asked May 9, '19

Hello all,

I want to make a diversion load for when the batteries are charged. Looking at only 700W of PV and a 1KVA diversion load.

It seems like if I add one of the battery alarms / controllers I can get this functionality, is this true?

And would I be wrong to think that the same aux output / relay circuit could be used to control AC coupled PV/Microinverters?

AC PV Coupling Assistants

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2019-05-10T04:11:42Z

Paul B answered · May 10, 2019 at 04:11 AM

Its up to you how you want to control the relay and what you want to use it for.

its a on/off relay thats triggered by the settings in the unit. how you apply these is upto yourself

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2019-05-10T18:23:24Z

coinstaller answered · May 10, 2019 at 06:23 PM

The settings in which unit? I'm trying to make sure I have everything squared away before purchasing.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.