Dear Victrons,
I experience restarts on a Multiplus 2 GX (3kW) when I use external control via Modbus TCP.
I have a battery connected that (in some situations) cannot provide the power that is requested by a setpoint via Modbus TCP.
Steps to reproduce:
- Connect a battery that provides only 1kW in charge/discharge to DC/48V
- Provide a setpoint beyond -1kW or +1kW for about a minute
--> System restarts
I am running an early 2.80 GX Firmware with Multiplus Firmware v494 and ESS with external control enabled.
I do have a BlueSolar MPPT attached with VE.Direct
Is this a known issue? Or even a safety feature?
Thank you very much!
Simon