question

Luit Jan avatar image
Luit Jan asked

Switch off Generator relay manually

Hi,

I use the Cerbo to switch on/off my generator and installed the automatic switch when battery SOC is below 70%. This works!

When the Cerbo switches the generator on based on the SOC I can’t switch it off manually. I had to disconnect the relay to get it off.

Do I miss a function or screen in the Cerbo, I like to be in control ….


Tnx

cerbo gxGenerator
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

under setting and generator autostart there is a toggle that turns Autostart on/off


or install this add on by Kevin Windrem and you can then use the cerbo tough screen

https://github.com/kwindrem/SetupHelper/blob/main/venus-data.tgz

Read the read me at the bottom of this link

https://github.com/kwindrem/SetupHelper

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.