The system was fitted for me. It's longer picking up wifi signal, colour control reads 'No Access points' for wifi. Colour control is fixed to a wall so I need to remove front cover to access wifi port etc at rear
Thanks
The system was fitted for me. It's longer picking up wifi signal, colour control reads 'No Access points' for wifi. Colour control is fixed to a wall so I need to remove front cover to access wifi port etc at rear
Thanks
Is the CCGX mounted in the standard Victron Wall Mount Enclosure (see https://www.victronenergy.com/accessories/wall-mount-enclosure-color-control-gx)?
If so, the box has 4 "key-hole" slots on the back that slide over 4 screws. The box should come away from the wall if you slide it upwards by about 10mm. You can then access the 4 corner-mounted screws that hold the CCGX to the mounting box.
2 People are following this question.