Where to connect remote start on SmartGen Generator Controller

Question

question

peetarr asked May 31, '21

User manual I have a 48v 5000 multiplus inverter

And a 25kva generator running a SmartGen controller

I have attached the manual

Could you please tell me where I connect the 2 wire remote start to on the smartgen controller

I have shown the manual to my supplier where I purchased the multiplus but there tech is unsure

Generator

20210601-091608.jpg (1.6 MiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

markus answered · Jun 01, 2021 at 08:04 AM

Hello,

according to your manual, you can program one of the AUX inputs to start your genset:

See: 8.3 DEFINED CONTENTS OF CONFIGURABLE INPUT PORTS 1~7 Table 12 - Programmable Inputs 1~7

I would ask the seller of the genset for proper guidance, how to program the input.

Best Regards

Markus

1622534401109.png (21.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2021-06-12T00:35:54Z

fatfash answered · Jun 12, 2021 at 12:35 AM

it is on page 49 of the manual. Connect to B- and any of the free Aux inputs(to be configured either as option 28.29 or 30 ).

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2023-03-22T20:43:22Z

jdb answered · Mar 22, 2023 at 08:43 PM

how have you done the wiring please. For starting , and also for stopping ? i don't see the manual in attach..

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.