question

Duncan Hall avatar image
Duncan Hall asked

system with hub1 no feedback returning power to grid

I have a system running venus 2.22 with hub 1 assistant as below

The system has a multiplus compact 12/1600/70-16 running firmware 430 a BMV700 running firmware 3.10 and a bluesolar MPPT 75/15 (large micro) running v1.39.

When I limit the input current to the multiplus 2.3A and apply a greater load the system fed back to grid. graphics below show the config and output.


Is this a bug?


Venus OS
1549912074443.png (21.3 KiB)
1549912138772.png (144.9 KiB)
1549912410286.png (32.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

Maybe try the ESS mode and see if that helps

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)