I’m researching whether the 12/2000 is UL 458, or if it at least meets the criteria even if it is not certified as such.
I’m researching whether the 12/2000 is UL 458, or if it at least meets the criteria even if it is not certified as such.
The serial number is on the back of the unit or inside on the left or right side.
Thanks, pretty un-handy to be on the back of a permanently mounted appliance.
Because of that it is also on the inside.
You have to remove the front plate.
Where would it be on a Multiplus 24/5000/120 please
The settings are software not hardware.
What do you use for configuration? VE.config or VictronConnect?
The configuration tool should also show you the serialnumber.
Plan to buy a MK3 to set it up because theres no Wifi but i downloaded the manual and theres no Lithium option shown . .
Good that you are a person that actually reads the manual. :)
But it's impossible to explain all programing possibilities in there.
Download VE.config and VictronConnect and take a look at the demo there.
https://www.victronenergy.com/support-and-downloads/software
43 People are following this question.