question

hansbaer avatar image
hansbaer asked

raspberry pi3 + Fronius Smart Meter + Venus OS

I have a raspberry 3 running with Venus OS as a Cerbo GX which is connected to my Fronius (Symo) Smart Meter and to a Multiplus II
The MP2 is only connected in Parallel with the AC 1 on the grid.

The Raspberry communicates via Modbus TCP with the Fronius Smart Meter

I will add some Pylontechs by the end of the week.


I´m using the https://github.com/RalfZim/venus.dbus-fronius-smartmeter script and for the can communication this https://powerforum.co.za/topic/4307-venus-pi-pylontech-integration/

No I have the following problem:

As long as I do not connect the MP II with the Raspberry via MK3, the "Cerbo" shows the correct visualziation. As soon as I connect the Multiplus (icnluding the ESS Assistant), the visualization seems to be wrong. The Fronius Smart Meter shows for all values "0"
If i disconnect the MPII from the Raspberry, the the problem does not disappear - only a new installation of the Venus OS solves the problem

and the AC-loads shows always almost the same amount as the PV inverter. :

(in the moment of the picture,453 W are produced by the PV and 105W are taken from the grid)


The connection of Fronius Smart Meter and Raspberry in general works, as long as I do not connect the MP II

Has anybody any clue where I could have made a mistake?



cerbo gxVenus OSEnergy MeterRaspberry PiFronius
1597210172077.png (20.3 KiB)
1597210241834.png (33.1 KiB)
1597210354348.png (22.1 KiB)
1597210563746.png (23.8 KiB)
1597212093984.png (108.3 KiB)
1597213505184.png (108.2 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mbr89 avatar image
mbr89 answered ·

this looks like ... :) victron products or GTFO :)

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.