question

steschu1 avatar image
steschu1 asked

Mppt 75/15 firmware update disturbs function

Mppt 75/15 after firmware update July 2020 the PV voltage is blocked at 16,3V and therefore the controller is not starting properly as the 5V threshold is not met. Can I go back to the former firmware? Can I reset the hardware? On full sunny day yesterday the charging was max 30% as normal

MPPT Controllersfirmware update
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
mickyritchie avatar image
mickyritchie answered ·
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual

Additional resources still need to be added for this topic