I have the BMV-712 connected to an emonPI via the VE direct cable. Using the monitoring tools from python, I am able to get a constant feed of data from the USB / Serial port.
However, the emon pi code has issues reading the data consistently and/or syncing up the feed.
Full details of this can be found here: https://github.com/openenergymonitor/emonhub/commit/f3508336e38267a569e8f72e1b2e090c7d405690
I am trying to get a dependable feed into the emon pi so that I can not only have all the data from my solar system in one place but also so I can use Node Red to control demand based on Load and/or SOC.
Any help would be appreciated. As mentioned in the original thread, I will still give 50$ via PayPal to whoever can get this working consistently.