Lykke avatar image

Multiplus configuration - Solar EV charging station

I’m building a small EV-charging station using an EasySolar 5000, a BMW i3 22kWh battery and some solar panels.. and it’s almost done :-)

I am thinking to start with a simple control, i.e. I plug in the car and let it charge at 3.7kW AC. When the SOC of the battery bank has dropped to say 10% SOC, I would like the Multiplus to turn on grid AC and complete the EV-charge, but leave the battery bank at 10% SOC.

I have read about the different assisatnts, but I don’t think any of Them is a straight fit. What’s the best way of setting this up? Sorry if this is trivial, I’m new to the Victron Universe :-)

solarmultiplus-ii gx
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers