question

turboslice avatar image
turboslice asked

100/20 controller wont leave bulk even when bmv-712 reports 100% charge

I have 350w of solar on my sailboat with the 100/20 mppt charge controller and the bmv-712 connected to 400ah of lithium batteries. The batteries consist of 16 individual 3.2v cells grouped up into 4 12v supercells and then connected in parallel.


My issue is that my bmv-712 will read 100% and be at 13.5 with the solar charger still in bulk pushing 260w all day long without ever leaving bulk or changing the voltage of the batteries from 13.5v. Manufacturer of the batteries say it should go up to 14.6v and then drop down

MPPT ControllersBMV Battery MonitorLithium Battery
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

turboslice avatar image turboslice commented ·

Here are my settings

0 Likes 0 ·
1 Answer
turboslice avatar image
turboslice answered ·

here are my settings


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.