question

mike-rack avatar image
mike-rack asked

How do I hook up two solar charge Controller to ccgx

I have a solar charger a. 150/85 that I ran a Communication wire to my CCgx I would like to hook up a 100/50 solar charge to my ccgx can just Daisy chain it to my 150/85 threw the communications wire and will both will read the right number on my ccgx or what would be the best way to hand it and what parts I have 7 panels on my toyhuler putting out 2600 watts 48 volt panels 10 amps i am pushing to many amp

CCGX Color Control
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

VE.Can can be daisy chained, VE.direct not.
The 100/50 is only available with VE.direct so you have to run a separate VE.direct cable to the CCGX.

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mike-rack avatar image mike-rack commented ·

I have both ports where this goes on the back of my color controller GX one with my solar 150/85charger and my other one with my 712 I need to add one more solar charger

0 Likes 0 ·
Matthias Lange - DE avatar image Matthias Lange - DE ♦ mike-rack commented ·

If you don't have a free VE.direct port you can use a VE.direct to USB cable.

https://www.victronenergy.com/accessories/ve-direct-to-usb-interface

0 Likes 0 ·