question

mip-nc avatar image
mip-nc asked

Why CCGX decide alone to stop MPPT BlueSolar?

Hello everyone,

we have installed several systems with: Multiplus 48/5000, MPPT 150/35, BMV 700. The elements are connected via a CCGX (v 2.11). Regularly, on 3 systems, the CCGX causes the MPPT to stop, the restart can only be done by restarting the CCGX. Does someone already have this problem really Dangerous for battery life?


Many thanks

MPPT ControllersCCGX Color Control
vrm1.png (96.4 KiB)
vrm2.png (60.8 KiB)
vrm3.png (115.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

Hi @MIP NC,

It’s not common. The examples you have shown above have been offline for 4 months, and had another overload alarm running at the same time.

Do you have more examples of current systems that are connected to VRM now, without other simultaneous alarms to help narrow down the possible causes in troubleshooting what might be causing it?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.