question

dickdecker avatar image
dickdecker asked

I am installing the Temperature Sensor on my Solar PV battery system using the BMV-712. There are 2 wires on the sensor but only one is shown on the Installation Guide. What does the other wire connect to?

BMV Battery MonitorTemperature Sensor
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
linqf avatar image
linqf answered ·

Look carefully at the picture and actually use a temperature sensor to connect the voltage and temperature signals simultaneously.


2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dickdecker avatar image
dickdecker answered ·

oops! (embarrassed), thanks linqf for quick response. I mistakenly thought that one of the + wires was one that came with the BMV-712. Evidently, neither of those wires are required when the Temp Sensor is used.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.