question

jakecloss avatar image
jakecloss asked

Change SOC values easy solar and byd batterys

Hello again.

The problem I have is my battery SOC only gets to 99%, so when for instance I set the generator to run until battery is full it never switches of I would like to know what values I need to change.

I have the Victron EasySolar 5kVA with Color Control panel and the BYD Battery-Box Pro LV with 4 battery modules 10.24 kWh.

Many thanks

SOC
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
ejrossouw avatar image
ejrossouw answered ·

hi @Jakecloss Can you confirm some settings e.g. is dvcc enabled, svs etc? Did you follow the Victron installation guide? Also, did you correctly set the battery size on the inverter?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

jakecloss avatar image
jakecloss answered ·

Yes I have followed the guide, I have also just reviewed the guide and checked all settings.



2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic