In my rv, I have 3 solar panels linked to a Victron MPPT, a Lifepo4, a BMV 702, different things such as cctv, monitors, leds.
The CTTV and monitors are turned on 24/7.
When the battery is on float mode the voltage stays around 13.48V and the current amperage is 0.
The problem is the consumed ampers go from 0 to -1.6A each time the battery is fulled and return to the float mode (after the two hour absorption mode).
I don't know if there is a way to change the settings to have 0 instead of -1.6A.
I tried to change the tail current, 4% 5% 6% it is always -1.6A each time after the absorption.
Does it have to do with the fact the CCTV cams and other items are working full time?
What can I do?