question

markwjeske avatar image
markwjeske asked

ccgx web interface and vrm not updating after battery upgrade

I changed out my battery from agm to lifepo4 this weekend, but the my ccgx web interface display (venus on a raspberrypi) is not updating correctly, the battery soc and in/out values and DC Power no longer display. Also system battery power on vrm has no data.

I have a smartsolar mppt 100/30 firmware 1.42

pheonix inverter 24/375 firmware 1.17

bmv-712 smart firmware 4.03

venus firmware 2.33

Note that everything was fine before the battery swap and the bmv-712 is wired correctly.

If I use victron connect with bluetooth to the bmv and mppt everything looks fine.


Thanks



CCGX Color Control
screen-shot-2019-09-30-at-94342-am.jpg (67.1 KiB)
screen-shot-2019-09-30-at-94451-am.jpg (140.6 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
markwjeske avatar image
markwjeske answered ·

Ahhh, figured it out on my own, for some reason my battery monitor in setup setup wasn't defined after the battery swap. Setting this got everything working!



screen-shot-2019-09-30-at-15505-pm.jpg (92.8 KiB)
screen-shot-2019-09-30-at-15658-pm.jpg (75.9 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.