question

chasen avatar image

Is it posible to set an alarm with two separate conditions

Hello everyone,

as my batteries already twice caused a low voltage alarm (although above 80% SOC) after some days with little sun, I would like to set an alarm for the voltage in combination to the current, i.e. "voltage < 24V while current < 10A". Anybody can think of a possibility to set such alarm or should I send a feature request to Victron?

Greetings from Colombia,

Christian

voltagemonitoring
2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Jaco Reinecke avatar image
Jaco Reinecke answered ·

Hi,

Use the alarms for Low SOC alarm and the Low Voltage Alarm on the BMV?

But no idea how to link that to the <10A
Maybe set the Low Voltage Alarm to 23.5v?

2 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.