Victron Quattro 40/8000 :Aux K Relay's used for diverted of surplus power in Off-grid Pv inverter suport system

Question

question

Gabriel Tanasescu asked Sep 26, '19

I have the attached diverted made by me, this is connected to the water heater 2000W.Is is connected to programabile K1 relay.

The settings is below

The settings of the Charger is below

Question:Is possible to use programabile K1 relay following the battery charging curent ? (in my case is 50 Amp =apox-2400W)

???????

Relay

1569485968696.png (44.5 KiB)

20190327-161435.jpg (887.6 KiB)

1569486349218.png (13.3 KiB)

1569486377788.png (13.3 KiB)

1569486431393.png (37.9 KiB)

1569496743795.png (15.9 KiB)

1569496762740.png (7.9 KiB)

1569496779321.png (12.4 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2020-02-26T22:20:37Z

CristiMV answered · Feb 26, 2020 at 10:20 PM

Hi Gabriel Have you tried in the end this? Is it working as expected? Thanks

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Gabriel Tanasescu commented · Apr 22, 2020 at 05:00 PM

Yes is working well .No more problem, but the best way is to use the USSR controlled by one Ct sensor by Arduino Nano.

0 ·

harold Gabriel Tanasescu commented · Apr 24, 2020 at 09:23 AM

Hi
Why do you use V as a level setting and not SOC%?

Harold

0 ·