GUI-v2 on VRM?

Question

This question was closed Apr 23 at 08:28 AM by nickdb for the following reason: Beta

question

Carl asked Apr 23, '24

Today i have a Beta tab named GUI-v2 on my VRM page.

But im only getting a error all the time when i try it...

Is it just very early beta or is that somthing im doing wrong?

Se pics.

VRM beta gui-v2

gui-1.jpg (15.2 KiB)

gui.jpg (120.9 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-04-23T07:21:26Z

dansonamission answered · Apr 23 at 07:21 AM

It errors on betavrm too

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-04-23T08:20:43Z

nickdb answered · Apr 23 at 08:20 AM

If you are not on the 3.40 beta there is no guiv2. This is documented on the release topic.

The link has been there for a long time.

Please try keep beta topics on the relevant beta thread. Thanks.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-04-23T08:27:54Z

nickdb answered · Apr 23 at 08:27 AM

The link is enabled if you run a beta. However not all betas have the gui so the link won’t work.

If you are going to beta test, you need to stay informed on the releases by regularly reading the topic and release notes.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.