ESP32 Arduino solution for monitoring and controlling a Multiplus II system

Question

question

roblatour asked Apr 8, '24

ESP32 Arduino solution for monitoring and controlling a Multiplus II system

This is not so much a question, as it may be an answer to anyone wanting to develop (or just wanting) an ESP32 based solution to monitor and control a Multiplus II using an ESP32.

I just now released an open source Arduino project for this.

It uses the MQTT info being generated from my Raspberry Pi Zero 2 W running Venus (GX).

Here's an example picture of it running:

If your interested, the source is posted on Github here:

https://github.com/roblatour/ESP32RemoteForVictron/

Hope it will be of use to you.

Rob

Venus OS Venus GX - VGX arduino

image02.jpg (50.7 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2024-04-09T08:23:58Z

gazza answered · Apr 09 at 08:23 AM

Nice project...! Good job.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-04-12T10:59:24Z

matt1309 answered · Apr 12 at 10:59 AM

Amazing looks very clean.

(Especially the perfectly sharpened aesthetic pencil for scale!)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 3 · 2024-04-25T14:40:49Z

juf answered · 4 days ago

I’m total impressed with this.
easy to use and Rob are very fast with program new ideas to the code.

magnificent

regards

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question