Victron Energy Cerbo GX - mk1 ports ?

Question

This question was closed Mar 07 at 04:22 PM by mjs500 for the following reason: Other

question

mjs500 asked Mar 7, '24

Victron Energy Cerbo GX - mk1 am right in saying 1 ve can port and 1 can bms port and can can bms port be config to 500kbs ?

cerbo gx

s-l1600.jpg (70.3 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-03-07T11:39:13Z

nickdb answered · Mar 07 at 11:39 AM

BMS CAN is 500kb by default. VE CAN is 250kb.

Each has 2 ports but a single bus, non isolated.

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

mjs500 commented · Mar 07 at 12:31 PM

thanks but trying to find out if cerbo gx in the pic has bms can ports or Just ve. can ports

BMS CAN is 500kb by default. VE CAN is 250kb. yes as per my rpi 4

0 ·

nickdb ♦♦ mjs500 commented · Mar 07 at 12:41 PM

Thats old. As far as I am aware, the independent CAN buses can be adjusted with different profiles.

0 ·