question

richardlocat avatar image

smart MPPT 100/30 led blink every 3 sec at bulk mode

I have version 1.39 for both controllers but only one blink every 3 sec. Both are charging at similar load why?

MPPT - Solar Charge ControllerBlue Smart Charger
1 comment
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Can you confirm which LED is blinking and when/under what conditions it does this?

1 Answer
richardlocat avatar image
richardlocat answered ·

Mark, is blinking all the time on all the conditions, even float condition. it is always the bulk Led. To add more detail of the situation, i noticed that both controllers are charging normally at Bulk and absorption but only one charging at Float mode. Thanks

Share
10 |3000 characters needed characters left characters exceeded

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.