Hi,
I have a Lynx BMS and I'm trying to communicate via CANbus to the device. I found the SOC value transmitted on the bus in PGN 0xEFFF and Vreg 0xFFF. I also saw several other Vregs 0x120, 0x201, 0xFFE, etc. coming across the bus but not 0x370 or 0x371 which I am interested in since I want to remotely monitor the state of the system.
I tried starting and stopping the unit and putting it on standby to see if the point would appear on change but had no luck.
Any advice would be appreciated
Thanks,
Anna
