How to get Venus to load a .dtbo file? (on a Beaglebone)

Question

question

Mike Dorsett asked Jun 7, '23

I want to try loading a device tree overlay, rather than rebuilding Venus. How would I do this please?

BTW, does anyone know where uEnv.txt is located? I've found some references to this, but no path.

Venus OS

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2023-06-07T06:31:12Z

bathnm answered · Jun 07, 2023 at 06:31 AM

@Mike Dorsett i assume this is on an RPI device. If so

Copy it into the directory /u-boot/overlays/ and then reference it as normal in the file /boot/config.txtx

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mike Dorsett commented · Jun 07, 2023 at 05:56 PM

No, This is on a beaglebone, (Black/green) the Pi has the spi port in the /dev register, this is missing from the bone.

0 ·