question

matthew-hodder avatar image
matthew-hodder asked

Guimods + AC Grid Meter = No data onscreen?

Hi folks,

I'm just in the process of commissioning our Cerbo GX system and today I've hooked up an AC Meter (ET112), setup in 'Grid Meter' mode.

I'm also using Guimods which I'm loving - but I'm having an issue with it not displaying any info from the AC meter.

For context, this is a system on our boat, doesn't have an inverter, it is powered by a 12V system and 240v generator (Victron Phoenix charger, 2 x smart shunts etc... and the ET112 meter).

On the stock standard VRM Gui - I can see the AC Load/Input on the GUI fine.

On the Guimods screen, I'm not seeing any of the AC load stats, so I'm not sure what I've configured wrong?

Screenshots below for what I'm seeing.

image.jpegimg-1553.jpgimg-1555.jpgimg-1554.jpg

acgui mods
img-1553.jpg (424.1 KiB)
img-1554.jpg (223.3 KiB)
img-1555.jpg (147.9 KiB)
image.jpeg (249.7 KiB)
1 comment
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

matthew-hodder avatar image matthew-hodder commented ·

Some more info - using the Guimods simple screen, that shows the data.

0b14efb7-7733-429b-9cf4-88676edb553e.jpeg


I’ve also noticed that the charger isn’t giving me proper state information (slight spelling mistake too).

11b9b6dd-c5f8-4d3d-997a-c8c59b239029.jpeg

e9f02ae5-0d77-41dd-aed6-7e90d992a27b.jpeg

0 Likes 0 ·
0 Answers

Related Resources

Additional resources still need to be added for this topic