Remote monitoring two separate three phase loads

Question

question

nawir asked May 27, '19

Remote monitoring two separate three phase loads

I'd like to ask if anyone from the Victron community has solved this particular challenge.

I have two customers who have invested in a large shared system.

Its made up of

6 x 10Kva Quattro

2 X Fronius Eco 27

3 X MPPT 250/100

CCGX

5400Ah 48V OPzS Batteries

76Kw of PV

The system works well, each one has a kWh meter - (not smart) and they can see they consumption only if they physically go and read it.

They would like to see their kWh/ loads on VRM individually if possible. Can this be done by 2 x 3 phase Smart meters?

Can a CCGX be connected to 2 smart meters on the load side and allow them to be monitored via vrm?

Thanks

Nawir

Kenya

offgrid

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Modifications Space

Node Red Space

Answer 1 · 2019-05-27T14:23:41Z

wkirby answered · May 27, 2019 at 02:23 PM

The purpose of connecting an energy meter to a GX device is for it to provide feedback into the system. They have to be assigned one of three roles like: "Grid Meter", "PV Meter", "Generator".
It is not possible to connect a stand alone meter that is only there for viewing readings remotely.

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question