Script to read out Ruuvi temperature and to control a shelly via HTTP

Question

question

matthias-reichert asked Oct 30, '22

I want to read out a Ruuvi Sensor to control a shelly via HTTP. Is the temperature to high start the fan via shelly 1+.

I want to control the shelly 1+ with HTTP like http://xxx.xxx.xxx.xxx/relay/0?turn=on.

But I don't know how to read out the sensor data and to run a script regulary every 5 minutes.

Thanks for help!

ruuvi sensors

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pau1phi11ips answered · Oct 30, 2022 at 09:49 PM

You can do this via NodeRED in the large version of Venus OS: https://www.victronenergy.com/live/venus-os:large

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-11-04T14:03:57Z

matthias-reichert answered · Nov 04, 2022 at 02:03 PM

Thank you!

My Flow works perfectly!

it's great to connect via VRM-Portal to Node Red

bildschirmfoto-2022-11-04-um-150024.png (251.8 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.