question

poorejj avatar image
poorejj asked

UPS function on Victron Multiplus 24/3000

Hello, I'm hoping someone can help me. I have the Multiplus 24/3000/70 and have it configured using Victron Connect to prioritize the battery and only allow AC Input on based on state of charge and/or when wattage exceeds a set value etc. Anyway the only issues I have had with my setup is that when my batteries reach the low state of charge set point and the multiplus switches to allow grid passthru, the delay in power is long enough to shut down my computers and make the lights flicker or ac unit shut down. The opposite is also true when it switches back over from the grid, to the batteries... I have the UPS function checked in the Victron Connect app.


Does anyone have any idea why this may be happening and what I can do about it?

multiplus ve.bus
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
poorejj avatar image
poorejj answered ·

BUMP.............

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.