question

flubber avatar image
flubber asked

Is my Cerbo GX broken? No Webinterface / Remote console

Hi guys,

I tried to install some scripts to add a MQTT meter for ESS.

Add one point my /dev/root directory was 100% full so I decided to make a reset with an USB-Stick.
I have done the reset before and it worked well.

But now after the reset the Webinterface was no longer reachable.

Remote Console on LAN 2022-07-03 21-04-15.jpg

I can ping my Cerbo and via the VictronConnect App the CerboGX is still reachable with the VRM ONLINE PORTAL.

I tried the reset again several times with different USB-Sticks but unfortunately nothing changed.

Can anybody help me?

Many thanks in advance!

cerbo gx
remote-console-on-lan-2022-07-03-21-04-15.jpg (84.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
flubber avatar image
flubber answered ·

I have made a little progress.
After I connected a monitor on my Cerbo GX I could enable SSH again and flash a new firmware.
Now I have disk space under /dev/root again.

But the web interface is still not working. :-(

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

flubber avatar image
flubber answered ·

Strange. The web interface is now working. I have not changed anything.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.