question

vassilis-bourdakis avatar image
vassilis-bourdakis asked

Lost VRM connection, SignalK/influx comms work: 2.90~3 Large on rpi3B+

just a quick Q if anyone experienced this.

After running same setup for 1.5yrs on various betas, for the first time lost VRM access.

It was a few days after upgrading to 2.90~3Large from 2.82something and following the 4G router providing internet connection to the boat running out of data (which is not the first time...)

Anyway, didn't have enough time, rebooted router (Teltonika RUT240) and rpi a few times, eventually switched from a wired connection to wifi and influxDB connection to work server was restored. However, VRM reports "last updated 1day ago". Other devices connected/reporting onboard work fine. Needless to say, connecting to remote console from laptop on same network onboard works fine.

Could be a router mishap, could not.

Didn't have time to reboot router to 2.82Large and see if things work or not, will do tonight.
Reluctant to upgrade to 2.90~8 as each upgrade means one hour editing signalK files for my custom NMEA2000 PGNs and recompiling ZeroTier-One, I should really sort/scrip this...

cheers

V.

VRM
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
vassilis-bourdakis avatar image
vassilis-bourdakis answered ·

Teltonika RUT240 to blame. Switched to 2.80L same thing.

Reset router, all's working both in 2.90 and 2.80

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.