Venus GX Analog input

Question

question

philippe asked Feb 2, '22

Hello

Noticed today that the temperature input 2 (_Garage) is grayed out while all is working as expected.

Firmware Venus GX V2.80

Venus OS

1643805096174.png (66.0 KiB)

1643805113559.png (46.1 KiB)

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2022-02-02T13:29:01Z

seb71 answered · Feb 02, 2022 at 01:29 PM

Try to toggle one of the working (not greyed out) inputs.

This fixes the greyed-out input in my Cerbo GX.

Note:

You will have to remove the unused sensors afterwards from Device List from GX and also from VRM Device List.

2

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

philippe commented · Feb 02, 2022 at 03:36 PM

@Seb71 Workaround did fix it. Thanks

@mvader (Victron Energy) Some minor fix to put on the list.

0 ·

mvader (Victron Energy) ♦♦ philippe commented · Feb 02, 2022 at 06:01 PM

Hi @philippe , yes thanks. Was checked today, and fixed in the code. I expect this fix to be included in a soon coming v2.8x release, perhaps v2.82

0 ·