question

Elimac avatar image
Elimac asked

Replacing VE.Bus cables in Multi parallel setup while operating

Hello, I need to change the UTP cables of the VE.Bus of a 2x Multiplus Parallel System that is managed by a VenusGX.

I would like to avoid turning the system OFF. Is it safe to interrupt the VE.Bus communication for a shot period (some seconds) while I change the UTP cable? Specially between the Master and Slave, I have some doubts if the system keeps working stable. I need at least 30 seconds.

multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

The system will shut down in the moment you disconnect the connection between the two Multis.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic