question

jakenort95 avatar image
jakenort95 asked

Cerbo gx tank sensor

Hi guys just wondering if my current tank sensor can be used with the cerbo gx or will I need to change the sensor 1000002543.jpg1000002544.jpgImage Caption

tank monitor
1000002543.jpg (4.3 MiB)
1000002544.jpg (4.0 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
nickdb avatar image
nickdb answered ·

The GX only supports resistive sensors, the GX tank accessory provides some additional options for current/voltage based sensors.


2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pwfarnell avatar image
pwfarnell answered ·

No way to tell from the pictures. The Cerbo tank inputs are resistance based.

The tank level ports can each be configured to work with either European (0 - 180 Ohm); or US tank senders (240 - 30 Ohm) standards; or to configure a custom Ohm resistance range between 0 Ohm and 300 Ohm (requires firmware v2.80 or higher).

All details can be found in the manual.

https://www.victronenergy.com/media/pg/Cerbo_GX/en/connecting-supported-non-victron-products.html#UUID-c06fc0ff-a4b4-e17e-ae24-97c8cd62b435

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.