question

brettd avatar image
brettd asked

Easysolar without communication

Hi there,

How can I run the inverter without communication?

I have Easysolar 12/1600/70 with Victron 100Ah smart battery with VE Bus BMS.

I would like to use lithium batteries without com ports

I have connected to the inverter and unchecked "Battery Monitor" but when I unplug the network cable the inverter turns off

Thanks

EasySolar All-in-One
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

You'll need to check the multiplus settings in the EasySolar using a MK3 usb cable and ve.config software. Also make sure its firmware is up to date.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.