Hi,
My Multiplus-II GX isn't displaying SOC, it never has since I installed it.
It displays "--" or says 0%
I've confirmed settings in Settings → System settings → Battery monitor
I've also tried changing it from "automatic", "MultiPlus-II 48/3000/35-32 on VE.Bus" and "No battery monitor" but it doesn't get it working.
When I select "no battery monitor" the "0W" reading disappears "(the bank currently has no load).
I've Googled around and searched the forum. Thanks for any help.
Hi @lukescarr
If you only have the Multi available to provide SOC, you'll need to enable it in the Multi. It looks like this in VEConfigure..
Better to grab a BMV or Smartshunt if you want a serious SOC.
Thanks John, that's sorted it.
I didn't see anything about having to nn specifically enable it via VEConfigure, I had assumed it was enabled by default and that by seeing battery monitor options in the remote console it was available be used.
Thanks again.
Hi all,
I have the same problem. Just put a second array of P/V so i used the socket on the CCGX where before was the bm-700 for the second Blue solar charger. i turned SOC to be monitored from the Multiplus but seems to read nothing, it's dropping constantly when both chargers are on float and i have 27.8 V on a 24v system. So the multiplus monitor doesn't read the charging. I tried to do what u said above but my vE config doesn't have this option. How do i solve the problem?
Why my VE config software doesn't have the option "Enable battery monitor"?
