EVCS - HQ2301 (EV charger with display) cannot be accessed remotely

Question

question

kta22 asked May 27, '24

EVCS - HQ2301 (EV charger with display) cannot be accessed remotely

Hello to all,

I've just installed my new EVCS - HQ230, it works pretty well with my Victron ecosystem but the issue i'm facing is that I can access charger page only when I'm in range of my wifi network. If I'm trying to connect connect via mobile network (away from home), I cannot access the charger page at all. I've tried with different mobile phones, but doesn't work. Do you have any idea about issue ? I also noticed if my I'm connected with CISCO(home network) on me netbook, the issue persists and I cannot connect to ev charger page, but if I diconnect CISCO, it works again. Thanks

evcs

1

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

ejrossouw commented · May 27 at 03:05 PM

@Kta22 How and what exactly are you trying to access? On VRM controls are accessible by enabling realtime updates and inverter charger remote control in settings.

The rconsole offers these too via the device list when you click on the charging station.

Access (as per below) will only be available on the LAN and you can achieve this remotely using a VPN, but I strongly advise against it.

0 ·

1716821772670.png (111.9 KiB)

1716821853603.png (34.6 KiB)

1716822100254.png (203.0 KiB)

Modifications Space

Node Red Space

Answer 1 · 2024-05-27T16:21:55Z

kta22 answered · May 27 at 04:21 PM

Thanks, clear !

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

question