question

wiking avatar image
wiking asked

Cerbo-S GX supplied with temp sensor, but where does it connect?

Hi, recently purchased a Cerbo-S GX device, which came with a temp sensor. However unlike the normal Cerbo-GX device, there is no labels on the port blocks of the Cerbo-S to connect a temp sensor? What am I missing?

cerbo gx
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

The Cerbo-S doesn't have temperature inputs, see datasheet:

https://www.victronenergy.com/upload/documents/Datasheet-Cerbo-GX-GX-Touch-EN-.pdf

The shouldn't be a senor in the box of the Cerbo-S, can you make a picture of that sensor?
Are you sure that sensor wasn't part of another device like a MultiPlus?

2 comments
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

wiking avatar image wiking commented ·

Thats a good point, I bought Cerbo-S GX and Multiplus 48/5000 at the same time. So, I can hook the temp sensor to the Multiplus?

0 Likes 0 ·
kevgermany avatar image kevgermany ♦♦ wiking commented ·
Yes
0 Likes 0 ·
wiking avatar image
wiking answered ·

thanks for clearing that up ))

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.