question

luphi avatar image
luphi asked

Multiplus 12/2000: monitoring aux/alarm relay

Hi all,

is there any way to monitor the state of the aux/alarm relay of a Multi? I was not able to find anything in dbus or in the modbus registers.

Cheers, luphi


multiplus ve.bus
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
derrick thomas avatar image
derrick thomas answered ·

You could connect the alarm relay to a digital input of the gx device and set the digital input as an alarm.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

luphi avatar image
luphi answered ·

nice idea, I will think about it at the weekend. Thank you for sharing.

Cheers, luphi

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic