question

Gerrie Rossouw avatar image
Gerrie Rossouw asked

Quattro internal CT

Good day


I have 3 site with the same issue,

When you look on the inverter on device list, it for example says, 230V and 0.8A but showing 1500W


The other site, we have limited the input done all relevant settings, but the unit keeps pulling up to 42A and then tripping his main breaker,


Is there a known issue on the quattro's?


Regards

MultiPlus Quattro Inverter ChargerESS
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

no known issue - usually its a setup issue, also make sure that the cerbo and inverters are on the latest fw as well. plus are you running any non orginal cerbo software .

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.