question

repairdad avatar image
repairdad asked

How to shutdown MultiPlus 3000 for low battery

I have MultiPlus 3000 24V with AGM batteries, with a battery Shunt and a Color Control GX panel. I'm trying to figure out where to set the inverter to shut down once the state of charge hits 50%.

I had a situation where the inverter stayed active and discharged the batteries to 20%. I'm hoping there is some setting that once the state of charge hits 50% the inverter will stop inverting. I don't want to ruin my batteries.

I have the MK-3 interface in case this setting can't be done though the GX control panel and has to be done directly in the inverter.

Please help .....

Battery Protect
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Marc Heymans avatar image
Marc Heymans answered ·

You can connect your Unit to your laptop via the Mk3 cable and use VE configure to set the Dc cut off in the inverter tab

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.